manualshive.com logo in svg

Siemens SINAMICS G, List Manual

Share
Download
Siemens SINAMICS G List Manual Download Page 256

Parameters

Parameter list

1-256

 Siemens AG 2004 All Rights Reserved

SINAMICS G List Manual, Edition 12.2004

Description:

Sets the message type for the selected fault or alarm.

Values:

1:

Fault (F)

2:

Alarm (A)

3:

No message (N)

Dependency:

Selects the fault or alarm selection and sets the required type of message realized under the same index.
Refer to: p2118

Notice:

It is not possible to re-parameterize the message type for the existing faults or alarms.

Note:

The message type can only be changed for messages with the appropriate identification.
Example:
F12345(A) --> Fault F12345 can be changed to alarm A12345.
In this case, the message number that may be possibly entered in p2100[0...19] and p2126[0...19] is automatically 
removed.

Description:

Displays the sum of all of the fault and alarm buffer changes in the drive unit.

Dependency:

Refer to: r0944, r2121

Description:

This counter is incremented every time the alarm buffer changes.

Dependency:

Refer to: r2110, r2122, r2123, r2124, r2125

Description:

Displays the number of alarms that have occurred.

Dependency:

Refer to: r2110, r2123, r2124, r2125, r2134, r2145, r2146

Note:

Alarm buffer structure (general principle):
r2122[0], r2124[0], r2123[0], r2125[0] --> alarm 1 (the oldest)
...
r2122[7], r2124[7], r2123[7], r2125[7] --> Alarm 8 (the latest)

p2119[0...19]

Setting the message type / Message type

All objects

Can be changed:

 U, T

Access level: 

3

Data type: 

Integer16

Data set: 

-

Function diagram: 

1750, 

8075

P-Group: 

Messages

Units group: 

-

Unit selection: 

-

Min Max 

Factory 

setting 

1 3 

1 

r2120

Sum of fault and alarm buffer changes / Sum buffer changed

All objects

Can be changed:

 -

Access level: 

4

Data type: 

Unsigned16

Data set: 

-

Function diagram: 

8065

P-Group: 

Messages

Units group: 

-

Unit selection: 

-

Min Max 

Factory 

setting 

- - 

- 

r2121

Counter, alarm buffer changes / Alrm buff changed

All objects

Can be changed:

 -

Access level: 

3

Data type: 

Unsigned16

Data set: 

-

Function diagram: 

8065

P-Group: 

Messages

Units group: 

-

Unit selection: 

-

Min Max 

Factory 

setting 

- - 

- 

r2122[0...7]

Alarm code / Alarm code

All objects

Can be changed:

 -

Access level: 

2

Data type: 

Unsigned16

Data set: 

-

Function diagram: 

1750, 

8065

P-Group: 

Messages

Units group: 

-

Unit selection: 

-

Min Max 

Factory 

setting 

- - 

- 

Summary of Contents for SINAMICS G





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands