manualshive.com logo in svg

Siemens SINAMICS G, List Manual

Share
Download
Siemens SINAMICS G List Manual Download Page 511

Overview of Faults and Alarms

Faults and Alarms

3-511

 Siemens AG 2004 All Rights Reserved

SINAMICS G List Manual, Edition 12.2004

Fault location (optional): Name

The fault location (optional), the name of the fault or alarm and the report number 
all serve to identify the report (e.g. with the commissioning software).

Reaction: Default fault reaction (adjustable fault reaction)

Specifies the default reaction in the event of a fault.

The optional parenthesis indicates whether the default fault reaction can be 
changed and which fault reactions can be adjusted via parameter.

Note:

See Section  3.1.1

Acknowledgement: Default acknowledgement (adjustable acknowledgement)

Specifies the default method of fault acknowledgement after the cause has been 
eliminated.

The optional parenthesis indicates whether the default acknowledgement can be 
changed and which acknowledgement can be adjusted via parameter.

Note:

See Section  3.1.1

Cause:

Description of the possible causes of the fault/alarm A fault or alarm value is also 
specified as an option.

Fault value (r0949, format):

The fault value is entered in the fault buffer in r0949[0...63] and specifies addi-
tional, precise information about a fault.

Alarm value (r2124, format):

The alarm value specifies additional, precise information about an alarm.

The alarm value is entered in the alarm buffer in r2124[0...7] and specifies addi-
tional, precise information about an alarm.

Note:

You can change the default properties of a fault or alarm by setting parameters.

References: /IH1/

SINAMICS S120 Commissioning Manual,
Section "Diagnostics"

Summary of Contents for SINAMICS G





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands