manualshive.com logo in svg

Siemens SINAMICS G, List Manual

Share
Download
Siemens SINAMICS G List Manual Download Page 134

Parameters

Parameter list

1-134

 Siemens AG 2004 All Rights Reserved

SINAMICS G List Manual, Edition 12.2004

Note:

The existing parameters are displayed in indices 0 to 98. If an index contains the value 0, then the list ends here. In 
a long list, index 99 contains the parameter number at which position the list continues.
This list completely comprises the following parameters:
r0980[0...99], r0981[0...99] ... r0989[0...99]
The parameters in this list are not displayed in the expert list of the commissioning software. However, they can be 
read from a higher-level control system (e.g. PROFIBUS master).

Description:

Displays the parameters that exist for this drive.

Dependency:

Refer to: r0980, r0981

Note:

The existing parameters are displayed in indices 0 to 98. If an index contains the value 0, then the list ends here.
This list completely comprises the following parameters:
r0980[0...99], r0981[0...99] ... r0989[0...99]
The parameters in this list are not displayed in the expert list of the commissioning software. However, they can be 
read from a higher-level control system (e.g. PROFIBUS master).

Description:

Displays those parameters with a value other than the factory setting for this drive.

Dependency:

Refer to: r0991, r0999

Note:

Modified parameters are displayed in indices 0 to 98. If an index contains the value 0, then the list ends here. In a 
long list, index 99 contains the parameter number at which position the list continues.
This list completely comprises the following parameters:
r0990[0...99], r0991[0...99] ... r0999[0...99]
The parameters in this list are not displayed in the expert list of the commissioning software. However, they can be 
read from a higher-level control system (e.g. PROFIBUS master).

Description:

Displays those parameters with a value other than the factory setting for this drive.

Dependency:

Refer to: r0990, r0999

Note:

Modified parameters are displayed in indices 0 to 98. If an index contains the value 0, then the list ends here. In a 
long list, index 99 contains the parameter number at which position the list continues.
This list completely comprises the following parameters:
r0990[0...99], r0991[0...99] ... r0999[0...99]
The parameters in this list are not displayed in the expert list of the commissioning software. However, they can be 
read from a higher-level control system (e.g. PROFIBUS master).

r0989[0...99]

List of existing parameters 10 / List avail par 10

All objects

Can be changed:

 -

Access level: 

4

Data type: 

Unsigned16

Data set: 

-

Function diagram: 

-

P-Group: 

-

Units group: 

-

Unit selection: 

-

Min Max 

Factory 

setting 

- - 

- 

r0990[0...99]

List of modified parameters 1 / List changed par 1

All objects

Can be changed:

 -

Access level: 

4

Data type: 

Unsigned16

Data set: 

-

Function diagram: 

-

P-Group: 

-

Units group: 

-

Unit selection: 

-

Min Max 

Factory 

setting 

- - 

- 

r0991[0...99]

List of modified parameters 2 / List changed par 2

All objects

Can be changed:

 -

Access level: 

4

Data type: 

Unsigned16

Data set: 

-

Function diagram: 

-

P-Group: 

-

Units group: 

-

Unit selection: 

-

Min Max 

Factory 

setting 

- - 

- 

Summary of Contents for SINAMICS G





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands