Renault Laguna III, Manual

Page: 2292 / 3699

36B
-
13
POWER ASSISTED STEERING
Power-assisted steering pump: Removal - Refitting
D91, and V4Y
36B
REMOVAL
I - REMOVAL PREPARATION OPERATION
a
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting ) (02A, Lifting equipment).
a
Remove:
- the engine cover,
- the engine undertray bolts,
- the engine undertray,
- the front right-hand wheel (see 35A , Wheels and
tyres , Wheel: Removal - Refitting , page 35A-1 ) ,
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting ) (55A, Ex-
terior protection),
a
Remove the accessories belt (see Accessories
belt: Removal - Refitting ) (11A, Top and front of
engine).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a
Fit the tool (Ms. 583) on the low pressure pipe be-
tween the reservoir and the power-assisted steering
pump.
a
Remove:
- the clip using the (Mot. 1448) ,
- the low pressure pipe ( 1 ) from the power-assisted
steering pump,
- the high pressure pipe ( 2 ) from the power assisted
steering pump.
a
Insert the blanking plugs.
Special tooling required
Ms. 583 Pipe clamps.
Mot. 1448 Remote operation pliers for
hose clips.
Tightening torques
m
high pressure pipe
union on the power-
assisted steering pump 21 N.m
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see
36A , Steering assembly , Steering:
Precautions for the repair , page 36A-4 ) .
135266