Renault Laguna III, Manual

Page: 3392 / 3699

47A
-
3
SIDE OPENING ELEMENTS
Front side door: Stripping - rebuilding
47A
STRIPPING
I - STRIPPING PREPARATION OPERATION
a
Lock the airbag computer. Apply the before repair
procedure using the
Diagnostic tool :
- connect the Diagnostic tool ,
- select « Airbag computer » ,
- go to repair mode,
- apply the « Before repair procedure » .
a
Disconnect:
- the battery (see Battery: Removal - Refitting )
(MR 415, 80A, Battery),
- the supply connector from the front side door wiring
harness.
II - STRIPPING OPERATION FOR PART
CONCERNED
a
Remove:
- the front side door trim (see Front side door trim:
Removal - Refitting ) (MR 416, 72A, Side opening
elements trim),
- the front side door sealing film (see Door sealing
film: Removal - Refitting ) (MR 416, 65A, Door
sealing),
- the door mirror (see Door mirror: Removal - Re-
fitting ) (MR 416, 56A, Exterior equipment),
- the front side door exterior weatherstrip (see Front
side door exterior weatherstrip: Removal - Re-
fitting
) (MR 416, 66A, Window sealing),
- the front side door moulding (see Front side door
protective strip: Removal - Refitting ) (MR 416,
55A, Exterior protection),
- the front side door frame interior trim (see Front
side door frame interior trim: Removal - Refit-
ting
) (MR 416, 72A, Side opening elements trim),
- the front side door pillar exterior trim (see Front
side door pillar exterior trim: Removal - Refit-
ting
) (MR 416, 56A, Exterior equipment),
- the anti-fouling seal,
- the front side door glass run channel (see Front
side door window run channel: Removal - Refit-
ting
) (MR 416, 66A, Window sealing),
- the window winder motor (see Electric window
motor: Removal - Refitting ) (MR 415, 87D, Elec-
tric windows - Sunroof),
- the front side door sliding window (see Front side
door sliding window: Removal - Refitting ) (MR
416, 54A, Windows),
- the front speakers (see Front speakers: Removal
- Refitting ) (MR 415, 86A, Radio),
- the front side door electric window winder mecha-
nism (see Front side door electric window
mechanism: Removal - Refitting ) (MR 416, 51A,
Side opening element mechanisms),
- the front side door lock barrel (see Front side door
lock barrel: Removal - Refitting ) (MR 416, 51A,
Side opening element mechanisms),
- the front side exterior door handle (see Exterior
door handle: Removal - Refitting ) (MR 416, 51A,
Side opening element mechanisms),
- the front side door lock (see Front side door lock:
Removal - Refitting ) (MR 416, 51A, Side opening
element mechanisms),
- the front side door check strap (see Front side
door check strap: Removal - Refitting ) (MR 416,
51A, Side opening element mechanisms),
- the side impact sensor (see Side impact sensor:
Removal - Refitting ) (MR 415, 88C, Airbags and
pretensioners),
- the driver's or passenger's front side door wiring
(see Driver's front side door wiring: Removal -
Refitting ) or (see Passenger's front side door
wiring: Removal - Refitting ) (MR 415, 88A, Wir-
ing).
REBUILDING
I - REBUILDING PREPARATION OPERATION
a
Always replace:
- the sealing film,
- the side impact sensor,
Equipment required
Diagnostic tool
Note:
The order of the operations described below is spe-
cific to the front side door replacement.
The following procedure applies to the front side
door on the vehicle.