Renault Laguna III, Manual

Page: 597 / 3699

11A
-
219
TOP AND FRONT OF ENGINE
Cylinder head: Removal - Refitting
V4Y, and 713
11A
a
Fit the engine wiring.
a
Clip:
- the engine wiring,
- the engine wiring connector ( 15 ) .
a
Refit the engine wiring bolts ( 16 ) .
a
Connect:
- the connector ( 17 ) from the oil pressure sensor,
- the connectors ( 18 ) from the injectors.
a
Refit:
- the rocker covers (see 11A , Top and front of en-
gine , Rocker cover: Removal - Refitting , page
11A-139 ) .
- the camshaft position sensors (see Camshaft po-
sition sensor: Removal - Refitting ) ,
- the ignition coils (see 17A , Ignition , Coils: Re-
moval - Refitting , page 17A-1 ) ,
- the intake distributor (see 12A , Fuel mixture , Inlet
distributor: Removal - Refitting , page 12A-75 ) .
a
Refit:
- the oil-water exchanger pipe,
- the clips ( 19 ) of the oil-water exchanger pipe using
the tool (Mot. 1448) ,
- the power-assisted steering pump (see Power-as-
sisted steering pump: Removal - Refitting )
(36B, Power-assisted steering),
- the accessories belts (see 11A , Top and front of
engine , Accessories belt: Removal - Refitting ,
page 11A-13 ) .
a
Top up the engine oil (see 10A , Engine and cylin-
der block assembly , Engine oil: Draining - Refill-
ing , page 10A-100 ) .
a
Remove the engine from component support (see
Engine support equipment: Use ) .
a
Couple the gearbox to the engine (see Automatic
gearbox: Removal - Refitting ) (23A, Automatic
transmission).
133843
133844
133867