Renault Laguna III, Manual

Page: 464 / 3699

11A
-
86
TOP AND FRONT OF ENGINE
Timing belt: Removal - Refitting
K4M
11A
a
Check through the lower timing cover window that
the adjustable index (
40 ) is opposite the notch ( 41 ) ,
if this is not the case:
- loosen the timing tensioning roller nut by up to one
turn while holding the eccentric with an Allen key,
- gradually move the adjustable index marker ( 40 )
opposite the mark ( 41 ) turning the eccentric cam
( 42 ) clockwise.
a
Torque tighten the timing tensioning roller nut (27
N.m) .
5 - Checking the timing
a
Ensure that the index and the notch on the timing
tensioning roller are in the correct position before
checking the timing.
a
Screw tool (Mot. 1489) into the cylinder block.
a
Move the crankshaft slowly and smoothly until it
comes into contact with the tool
(Mot. 1489) .
a
Position (without forcing) the tool (Mot. 1496)
equipped with the tool (Mot. 1750) (the camshaft
end grooves must be horizontal and offset down-
wards).
a
Remove:
- the timing tool (Mot. 1496) fitted with the (Mot.
1750) ,
- the (Mot. 1489) from the cylinder block.
109051
103263
14490
Note:
If the tool (Mot. 1496) equipped with the tool
(Mot. 1750) cannot be engaged, readjust the tim-
ing and the tension.