Renault Laguna III, Manual

Page: 175 / 3699

10A
-
98
ENGINE AND CYLINDER BLOCK ASSEMBLY
Engine - gearbox assembly: Removal - Refitting
V9X
10A
a
Clip the max fuse box on its support.
a
Fit the max fuse box.
a
Refit:
- the max fuse box clip,
- the max fuse box bolt,
- the max fuse box cover,
- the protection and switching unit (see Protection
and Switching Unit: Removal - Refitting ) (87G,
Engine compartment connection unit),
- the battery disconnection unit (see Battery dis-
connection unit: Removal - Refitting ) (80A, Bat-
tery),
- the power-assisted steering fluid reservoir.
a
Connect the power-assisted steering hose.
a
Fit the power-assisted steering hose clip using the
(Mot. 1448) .
a
Refit the power-assisted steering hose.
a
Connect the power-assisted steering hose.
a
Fit the power-assisted steering hose clip using the
(Mot. 1448) .
a
Fit the power-assisted steering reservoir.
a
Clip:
- the power assisted steering fluid reservoir,
- the lower power-assisted steering pipe on the sub-
frame.
a
Fit the lower power-assisted steering pipe.
a
Connect the lower power-assisted steering pipe.
a
Refit:
- the bolt of the power-assisted steering bracket,
- the radiator mounting cross member (see Radiator
mounting cross member: Removal - Refitting )
(41A, Front lower structure),
- the additional radiator (see Additional radiator:
Removal - Refitting ) ,
- the electric coolant pump of the exhaust cooler
(see 19A , Cooling , Electric coolant pump: Re-
moval - Refitting , page 19A-159 ) ,
- the pre-postheating unit (see 13C , Preheating ,
Pre-postheating unit: Removal - Refitting , page
13C-1 ) ,
- the air outlet pipe of the air filter unit.
a
Connect the oil vapour rebreathing pipe to the air fil-
ter box air outlet pipe.
a
Clip on the vacuum pipes of the turbocharger control
solenoid valve.
a
Torque tighten the clip of the air filter unit air out-
let pipe (6 N.m) .
a
Refit the intercooler air inlet pipe.
a
Fit the intercooler air inlet pipe.
a
Connect the intercooler air inlet pipe.
a
Fit the clip of the intercooler air inlet pipe.
a
Torque tighten the nut of the intercooler air inlet
pipe (21 N.m) .
a
Refit:
- the front impact cross member (see Front impact
cross member: Removal - Refitting ) (41A, Front
lower structure),
- the « cooling radiator - condenser - intercooler »
(see 19A , Cooling , Cooling radiator: Removal -
Refitting , page 19A-28 ) assembly,
- the engine cooling fan assembly (see 19A , Cool-
ing , Engine cooling fan assembly: Removal -
Refitting , page 19A-121 ) ,
- the front end panel (see Front end panel: Remov-
al - Refitting ) (42A, Upper front structure),
- the bonnet catch (see Bonnet lock: Removal -
Refitting ) (52A, Non-side opening element mecha-
nisms),
- the audible warning (see Audible warning: Re-
moval - Refitting ) (82B, Horn),
- the air filter unit (see 12A , Fuel mixture , Air filter
unit: Removal - Refitting , page 12A-13 ) ,
- the front right-hand driveshaft (see Front right-
hand driveshaft: Removal - Refitting ) (29A,
Driveshafts),
- the front left-hand driveshaft (see Front left-hand
driveshaft: Removal - Refitting ) (29A, Drive-
shafts),
- the headlights (see Headlight: Removal - Refit-
ting ) (80B, Headlights).
a
Connect the battery (see Battery: Removal - Refit-
ting ) (80A, Battery).
a
Perform the following operations:
- fill and bleed the cooling circuit (see 19A , Cooling ,
Cooling system: Draining - Refilling , page 19A-
16 ) ,
- fill the refrigerant circuit using a refrigerant charg-
ing station (see Refrigerant circuit: Draining -
Filling ) (62A, Air conditioning).