Renault Laguna III, Manual

Page: 3619 / 3699

71A
-
23
BODY INTERNAL TRIM
B-pillar upper trim: Removal - Refitting
D91
71A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a
Remove:
- the front door sill lining (see 71A , Body internal
trim , Front door sill lining: Removal - Refitting ,
page 71A-12 ) ,
- the side section (see Side section: Removal - Re-
fitting ) ,
- the rear bench seat base (see 76A , Rear seat fra-
mes and mechanisms , Rear bench seat base:
Removal - Refitting , page 76A-3 ) ,
- the rear quarter panel trim (see 71A , Body inter-
nal trim , Rear quarter panel trim: Removal - Re-
fitting , page 71A-27 ) ,
- the rear panel trim (see 71A , Body internal trim ,
Rear panel trim: Removal - Refitting , page 71A-
31 ) .
a
Remove the trim ( 1 ) from the front side seat belt re-
turn mechanism using the tool (Car. 1363) .
a
Remove the bolt from the front side seat belt return
mechanism (
2 ) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a
Essential special tooling
Car. 1363 Set of trim removal levers.
Tightening torques
m
front side seat belt
return mechanism bolt 21 N.m
133965
133967
Note:
When removing the B-pillar upper trim, take care
not to deform the headlining in that area.