Renault Laguna III, Manual

Page: 2820 / 3699

85A
-
24
WIPING - WASHING
Rain and light sensor: Removal - Refitting
AIR CONDITIONING 01 or AIR CONDITIONING 02, and AUTOMATIC WINDSCREEN WIPER
85A
II - REFITTING OPERATION FOR PART
CONCERNED
a
1 - Replacing the rain and light sensor
a
Fit the rain and light sensor by positioning the con-
nections at the top.
a
Clip on the side clips of the rain and light sensor.
a
Wait 5 minutes before connecting the connector of
the rain and light sensor.
a
Connect the rain and light sensor connector.
2 - Replace the windscreen
a
Position:
- the new adhesive base with the transparent light
guide ( 8 ) towards the bottom,
- the rain and light sensor's printed circuit unit with
the connector at the top.
a
Clip:
- the rain and light sensor's printed circuit unit onto
the new adhesive base,
- the rain and light sensor onto the windscreen
mounting ring using the side clips.
a
Wait 5 minutes before connecting the connector of
the rain and light sensor.
a
Connect the rain and light sensor connector.
III - FINAL OPERATION.
a
Connect the connectors of the covers under the rear
view mirror.
a
Clip on the covers under the rear view mirror.
Note:
The audible locking of the side clips fixing the
rain and light sensor onto its mounting ring on
the windscreen confirm that it is correctly held
and positioned.
Note:
To avoid damaging the adhesive base, do not
turn the rain and light sensor once it is positioned
on the windscreen.
Note:
Wait 5 minutes before connecting the rain and
light sensor to allow air bubbles between the
adhesive base and the windscreen to disperse.
124345