Renault Laguna III, Manual

Page: 921 / 3699

13A
-
10
FUEL SUPPLY
Manual priming pump: Removal - Refitting
V9X
13A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting ) (02A, Lifting equipment).
a
Disconnect the battery (see Battery: Removal - Re-
fitting ) (80A, Battery).
a
Remove:
- the engine cover,
- the engine undertray bolts,
- the engine undertray,
- the expansion bottle (see 19A , Cooling , Expan-
sion bottle: Removal - Refitting , page 19A-152 ) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a
Disconnect the electric diesel fuel heater fuel inlet
union (
1 ) .
a
Fit blanking plugs on the fuel unions.
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see
13B , Diesel injection , Diesel injec-
tion: Precautions for the repair , page 13B-1 ) .
IMPORTANT
During this operation, be sure to:
- refrain from smoking or bringing red hot objects
close to the working area,
- be careful of fuel splashes when disconnecting the
union.
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
IMPORTANT
Wear goggles with side protectors for this opera-
tion.
WARNING
To avoid any corrosion or damage, protect the
areas on which fuel is likely to run.
WARNING
To prevent impurities from entering the circuit, place
protective plugs on all fuel circuit components
exposed to the open air.
137873