Renault Laguna III, Manual

Page: 393 / 3699

11A
-
15
TOP AND FRONT OF ENGINE
Accessories belt: Removal - Refitting
M9R
11A
REFITTING
I - REFITTING PREPARATION OPERATION
a
parts always to be replaced: Accessories belt
(10,10,01,03)
,
parts always to be replaced: Accessories belt
tensioning roller (10,10,01,04)
,
parts always to be replaced: Accessories fixed
roller (10,10,01,06)
,
II - REFITTING OPERATION FOR PART
CONCERNED
a
Check that the fixed roller anti-dust deflector ( 6 ) is
correctly positioned.
a
Refit:
- the new fixed roller,
- the fixed roller bolt.
a
Torque tighten the fixed roller bolt (44 N.m) .
a
Refit:
- the fixed roller protector
- the new tensioning roller,
- the tensioning roller bolts.
a
Torque tighten the tensioning roller bolt (25 N.m) .
a
Refit the new accessories belt.
a
Remove the tensioning roller locking pin.
a
Turn the crankshaft twice.
a
Check that the accessories belt V-grooves are cor-
rectly fitted in the accessories pulley V-grooves.
III - FINAL OPERATION
a
Refit:
- the right-hand side member tie-rod,
Note:
The Parts Department supplies the tensioning
roller with a pin in the locked position.
WARNING
Only use brushes with plastic or non-corrosive
metal (brass) bristles.
Note:
Clean the V-grooves on all accessories pulleys
using a
brush with non abrasive bristles .
M9R, and 746 or 809 or 849
127406