Renault Laguna III, Manual

Page: 262 / 3699

10A
-
185
ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
F4R
10A
a
Apply a bead of MASTIXO (see Vehicle: Parts and
consumables for the repair ) (MR 415, 04B, Con-
sumables - Products):
- at ( A ) each side of bearing no.1,
- at ( B ) at the joint between the cylinder block and
crankshaft closure panel.
II - REFITTING OPERATION FOR PART
CONCERNED
a
Refit:
- the new sump gasket,
- the lower cover,
- the sump bolts on the cylinder block,
- the sump bolts on the gearbox.
a
Torque tighten and in order:
- sump bolts (8), (15), (4), (19), (11) and (12) (18
Nm)
,
- sump bolts (10, (13), (9), (14), (8), (15), (7), (16),
(6), (17), (5), (18), (3), (20), (2), (21), (1) and (22)
(15 Nm)
,
- the sump bolts on the gearbox (44 Nm) .
III - FINAL OPERATION.
a
Fill up the engine oil, observing the quantity recom-
mended by the manufacturer (see
10A , Engine and
cylinder block assembly , Engine oil: Draining -
Refilling , page 10A-100 ) .
a
Refit:
- the engine undertray,
- the engine undertray bolts.
a
Tighten the engine undertray bolts.
a
Check the oil level using the dipstick.
a
Adjust the engine oil level if necessary.
15159
WARNING
Applying excess sealant could cause it to be
squeezed out when parts are tightened. A mix-
ture of sealant and fluid could damage certain
components (engine, radiator, etc.).
15195