Renault Laguna III, Manual

Page: 192 / 3699

10A
-
115
ENGINE AND CYLINDER BLOCK ASSEMBLY
Engine oil: Draining - Refilling
V9X
10A
I - RECOMMENDATIONS FOR REPAIR
a
Direction of fitting for a drain plug seal.
a
There is no direction of fitting for a seal fitted with a
rubber lip.
II - PARTS AND CONSUMABLES FOR THE REPAIR
WORK
a
parts always to be replaced: Drain plug seal on
engine oil sump (10,03,01,04)
.
a
Consumable:
- engine oil (see Engine oil: Specifications ) (Tech-
nical Note 6013A, 04A, Lubricants).
Equipment required
oil recovery tray
oil change wrench
torque wrench
oil change end piece with an 8 mm square drive
Tightening torques
m
engine oil sump drain
plug 44 N.m
Engine
Average oil capacity (adjust with
dipstick) (l)
Draining O i l c h a n ge
plus oil filter
replacement
V9X 6.5 6.8
129066
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
WARNING
Always check the oil level using the dipstick.
Do not exceed the maximum level on the dipstick
(could destroy the engine).
Correct the engine oil level if necessary before
delivering the vehicle to the customer.
Note:
When topping up the engine oil, always leave at
least
10 minutes before checking the level with a
dipstick.