Renault Laguna III, Manual

Page: 2997 / 3699

88A
-
91
WIRING HARNESS
Rear wiring: Removal - Refitting
K91
88A
a
Unclip the wiring at ( 5 ) .
a
Disconnect the R 401 connectors on the boot lid/
heated rear screen wiring connection (
6 ) .
a
Remove the rear wiring from the vehicle.
REFITTING
I - REFITTING PREPARATION OPERATION
a
If replacing with more wiring, lock the unused con-
nectors (see
Connector: Sealing and immobilisa-
tion ) (Technical Note 6015A, 88A, Wiring).
II - REFITTING OPERATION FOR PART
CONCERNED
a
Position the rear wiring.
a
Clip on the rear wiring.
a
Attach the rear wiring.
a
Connect:
- the R 401 connectors on the boot lid/heated rear
screen wiring connection,
- the R 621 connector on the left tailgate/left tailgate
intermediate connection,
- the rear screen wiper motor connector,
- the R 244 connector on the boot lid/left rear con-
nection.
III - FINAL OPERATION.
a
Refit:
- the rear left-hand quarter panel trim (see Quarter
panel trim: Removal - Refitting ) (71A, Body inter-
nal trim).
- the tailgate trim (see Tailgate trim: Removal - Re-
fitting ) (73A, Non-side opening elements trim),
a
Connect the battery (see 80A , Battery , Battery: Re-
moval - Refitting , page 80A-4 ) .
125679
125641
WARNING
To prevent any damage during the removal oper-
ation, check that the wiring is free from its mount-
ings (retaining clip, plastic clip, adhesive tape,
connector, etc.).