Renault Laguna III, Manual

Page: 2814 / 3699

85A
-
18
WIPING - WASHING
Rear screen wiper motor: Removal - Refitting
B91
85A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a
Switch on the ignition.
a
Move the wiper stalk from (0) to (1), then from (1) to
(0).
a
Switch off the ignition.
a
Remove:
- the rear wiper arm (see 85A , Wiping - Washing ,
Rear screen wiper arm: Removal - Refitting ,
page 85A-13 ) ,
- the tailgate trim (see Tailgate trim: Removal - Re-
fitting ) (MR 416, 73A, Non-side opening elements
trim).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a
Disconnect the connector ( 1 ) from the rear screen
wiper motor.
a
Remove:
- the rear screen wiper motor rivets ( 2 ) (see MR
400 ),
- the rear screen wiper motor.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a
Refit:
- the rear screen wiper motor ,
- the rear screen wiper motor rivets (see MR 400 ).
a
Connect the rear screen wiper motor connector.
II - FINAL OPERATION.
a
Refit the tailgate trim (see Tailgate trim: Removal -
Refitting ) (MR 416, 73A, Non-side opening element
trim).
a
Switch on the ignition.
a
Move the wiper stalk from (0) to (1), then from (1) to
(0).
a
Switch off the ignition.
a
Refit the rear wiper arm (see 85A , Wiping - Wash-
ing , Rear screen wiper arm: Removal - Refitting ,
page 85A-13 ) .
WARNING
To ensure that the wiper arms can travel
smoothly, the wiper motor must be initialised.
125111
WARNING
To ensure that the wiper arms can travel
smoothly, the wiper motor must be initialised.