11A
-
226
TOP AND FRONT OF ENGINE
Cylinder head: Removal - Refitting
V9X
11A
REFITTING
I - REFITTING PREPARATION OPERATION
a
a
Use
SUPER CLEANING AGENT FOR JOINT FA-
CES
(see
Vehicle: Parts and consumables for
the repair
) (04B, Consumables - Products) to clean:
- the cylinder block gasket face,
- the cylinder head gasket faces on the cylinder
block.
a
Remove the residue using a plastic spatula.
a
Finish cleaning the gasket faces using a
GREY
ABRASIVE PAD
, part number
77 01 405 943
.
a
parts always to be replaced: cylinder head bolts
(10,02,01,14)
.
parts always to be replaced: Cylinder head gas-
ket (10,02,01,04)
.
a
Always replace:
- the O-ring for the dipstick well,
- the seals for the inter-intake distributor pipes,
- the O-rings for the inter-intake distributor pipes,
- the seals from the cylinder head outlet intermediate
coolant duct,
- the O-ring for the coolant pump outlet pipe on the
cylinder head outlet intermediate coolant duct side.
a
Check that the cylinder head centring dowels (
13
)
are present.
a
Remove the flywheel locking tool
(Mot. 1431)
.
a
Position the pistons at mid-stroke.
a
Identify the cylinder head gaskets (see
Cylinder
head: Check
) .
WARNING
Protect the oilway so that foreign bodies do not
enter the oil pipes in the cylinder head.
Failure to follow this instruction could lead to the
blocking of the oilways, resulting in a rapid deteri-
oration of the camshaft.
WARNING
Do not scrape the joint faces of the aluminium,
any damage caused to the joint face will result in
a risk of leaks.
135106
Summary of Contents for Laguna III
