![background image](http://html1.mh-extra.com/html/omron/sysmac-cs1d-cpu/sysmac-cs1d-cpu_reference-manual_742268916.webp)
877
High-speed Counter/Pulse Output Instructions
Section 3-21
Description
PRV2(883) converts the pulse frequency input from high-speed counter 0,
according to the conversion method specified in C1 and the pulses/revolution
coefficient specified in C2, and outputs the result to D and D+1.
Select one of the following conversion methods by setting C1 to 0000 hex or
0001 hex.
Converting Frequency to Rotation Speed (C1 = 0
@
*
0 hex)
If C1 is 0
@
*
0 hex, PRV2(883) calculates the rotation speed (r/min) from the
frequency data and pulses/revolution setting. The second digit of C (
@
) speci-
fies the units and the third digit (
*
) specifies the frequency calculation method.
1.
Rotation Speed Units
• Rotation Speed Units = r/min
When the second digit of C (
@
) is 0, PRV2(883) calculates the rotation
speed in r/min from the frequency data and pulses/revolution setting.
Rotation speed (r/min) = (Frequency
÷
Pulses/revolution)
×
60
• Rotation Speed Units = r/s (CJM1 CPU Unit Ver. 3.0 or later only)
When the second digit of C (
@
) is 1, PRV2(883) calculates the rotation
speed in r/s from the frequency data and pulses/revolution setting.
Rotation speed (r/s) = Frequency
÷
Pulses/revolution
• Rotation Speed Units = r/h (CJM1 CPU Unit Ver. 3.0 or later only)
When the second digit of C (
@
) is 2, PRV2(883) calculates the rotation
speed in r/h from the frequency data and pulses/revolution setting.
Rotation speed (r/h) = (Frequency
÷
Pulses/revolution)
×
60
×
60
• Range of Conversion Results
• Counter input method: Any method besides 4
×
differential phase mode
Conversion result = 00000000 to 000186A0 hex (0 to 100,000)
Holding Bit Area
---
H000 to H511
H000 to H510
Auxiliary Bit Area
---
A448 to A959
A448 to A958
Timer Area
---
T0000 to T4095
T0000 to T4094
Counter Area
---
C0000 to C4095
C0000 to C4094
DM Area
---
D00000 to D32767
D00000 to D32766
EM Area without bank
---
---
---
EM Area with bank
---
---
---
Indirect DM/EM
addresses in binary
---
@ D00000 to @
D32767
@ D00000 to @
D32767
Indirect DM/EM
addresses in BCD
---
*D00000 to
*D32767
*D00000 to
*D32767
Constants
See descrip-
tion of oper-
and.
---
---
Data Registers
---
---
---
Index Registers
---
---
---
Indirect addressing
using Index Registers
---
,IR0 to ,IR15
–2048 to +2047 ,IR0 to
–2048 to +2047 ,IR15
DR0 to DR15, IR0 to IR15
,IR0+(++) to ,IR15+(++)
,–(– –)IR0 to, –(– –)IR15
Area
C1
C2
D
Summary of Contents for SYSMAC CS1D-CPU**
