![background image](http://html1.mh-extra.com/html/omron/sysmac-cs1d-cpu/sysmac-cs1d-cpu_reference-manual_7422681158.webp)
1119
File Memory Instructions
Section 3-26
Note
When another file memory related operation (file memory format, file copy, file
delete, etc.) is executed from the ladder program, send the file memory
related FINS command to the local CPU Unit with a CMND(490) instruction.
For details, refer to
Section 5 File Memory Functions
in the
SYSMAC CS/CJ
Series Programmable Controllers Programming Manual
(W394).
Precautions
The File Memory Operation Flag (A34313) is turned ON when TWRIT(704) is
executed. An error will occur and the instruction will not be executed if A34313
is already ON.
The File Write Impossible Flag (A34309) will be turned ON and the instruction
will not be executed if data could not be written because the file was write-pro-
tected or there was not enough free memory.
A few seconds is required for the CPU Unit to detect a Memory Card after it
has been inserted. If a Memory Card is going to be accessed soon after
power is turned ON or after a Memory Card is inserted, use the Memory Card
Detected Flag (A34315) in a NO input condition as shown in the example
below to be sure that the Memory Card has been detected.
Example
This example records the daily production total (number of units produced) in
D00100 and D00101 in 8-digit hexadecimal. Every day at 23:00, the program
converts the daily production total to BCD format and appends the file
LOG.TXT in the Memory Card’s root directory.
No File Flag
A34311
ON when the specified directory does not
exist when writing a file.
File Memory Operation
Flag
A34313
ON for any of the following, otherwise OFF:
• The CPU Unit has sent a command to
itself using CMND(490).
• FREAD(700), FWRIT(701), or
TWRIT(704) is being executed.
• The program is being overwritten using a
control bit in memory.
• A simple backup operation is being per-
formed.
Accessing File Flag
A34314
ON when file data is actually being
accessed.
Memory Card Detected
Flag
A34315
ON when a Memory Card has been
detected.
OFF when a Memory Card could not be
detected.
Number of Data Items to
Transfer
A346 and
A347
The contents of these words indicate the
status of data file transfers.
When an file write instruction is executed,
the number of bytes to be transferred is writ-
ten to these words. The value is decre-
mented by 1 as each byte is transferred.
A346 contains the rightmost 16 bits and
A347 contains the leftmost 16 bits of the 32-
bit binary value.
Name
Label
Operation
Summary of Contents for SYSMAC CS1D-CPU**
