UCTRONICS MACHINE LEARNING KIT
Based on Raspberry Pi Pico
Instruction Manual
SKU: U6180
INTRODUCTION
SCHEMATIC VIEW
HARDWARE SETUP
SPECS
UCTRONICS Machine Learning kit is designed to offer a compact hardware base for more
possibilities of the Raspberry Pi Pico. The on-board mini breadboard and expanded available
GPIO pins get you started in learning the electronics and circuits easily. More importantly, the
kit packs a camera, a display, microphone to help you run the examples of Tensorflow Lite
Micro tiny machine learning, which has been ported to the RP2040.
1. Align and insert the Pico header into the socket.
2. Align and insert the HM01B0 camera header into the socket, keep the camera outwards.
3. Plug the USB end of the Micro USB cable to the computer, then press and hold the
This manual includes how to set up the camera and run the 2 pre-trained TensorFlow Lite Micro
examples, Person Detection and Wake-Word Detection. You can also build, train and deploy
your models on it.
Camera Module
HiMax HM01B0, Up to QVGA (320 x 240)@60fps
0.96 inch LCD SPI Display (160 x 80, ST7735)
5V
Screen
Operating Voltage
Breadboard
Dimension
35x47mm, 170 points
90x70mm
01
03
02
11
06
04
05
07
08
09
10
4 x programmable buttons
Display
Power indicator
Socket for Pico
Socket for HM01B0 and HM0360 camera
Reserved interface for Wifi and Bluetooth module
Mini Breadboard
Reset button
Microphone
Socket for SPI camera
Pico GPIO expander
01
03
05
07
09
11
02
04
06
08
10
