![background image](http://html1.mh-extra.com/html/omron/cj1w-c113-rev-02-2008/cj1w-c113-rev-02-2008_operation-manual_742339061.webp)
34
External I/O Circuitry
Section 3-4
!Caution
Connect a load of 7 to 30 mA (or 7 to 16 mA for terminals with 1.6-k
Ω
limit
resistance) to the output section. If a current greater than this is used, it will
cause damage to the PCU’s internal components. Also, be sure to use the
CW/CCW output method when using pulse output terminals with limit resis-
tance.
Add bypass resistance for loads less than 7 mA.
Outputs (Line Driver Outputs on the CJ1W-NC133/NC233/NC433)
Note
Error counter reset output is open collector output.
!Caution
Connect a load of 20 mA max. to the output section. If a current greater than
this is used, it will cause damage to the PCU’s internal components.
Open collector output
Open collector output with 1.6 k
Ω
series resistance
Output
7 to 30 mA
Output transistor
Output
7 to 16 mA
24 VDC
power
supply
PCU
Driver
6 mA
1 mA
Bypass resistance
7 mA
(Circuit example)
Pulse output power supply, 5 VDC
Pulse output GND, 5 VDC
CW pulse output (+)
CW pulse output (–)
CCW pulse/direction output (+)
CCW pulse/direction output (–)
A4/B4
A3/B3
A5/B5
A6/B6
A7/B7
A8/B8
Summary of Contents for CJ1W-C113 - REV 02-2008
