Omron CJ1W-C113 - REV 02-2008, Operation Manual

Page: 360 / 406

333
Error Code Lists Section 11-5
Interrupt feed-
ing Interrupt feeding
position error 7200 The position designation of inter-
rupt feeding is outside the settable
range (–1,073,741,823 to
1,073,741,823 pulses). Execute the com-
mand again after
correcting the posi-
tion or speed desig-
nation to a value in
the settable range. The current START
command will not
be executed, but
other operating
axes will not be
affected.
Interrupt feeding
speed error 7201 The speed designation of interrupt
feeding is outside the settable
range (1 to 500,000 pps).
Interrupt feeding
acceleration time
error 7202 The acceleration time designation
of interrupt feeding is outside the
settable range (0 to 250 ms).
Interrupt feeding
deceleration time
error 7203 The deceleration time designation
of interrupt feeding is outside the
settable range (0 to 250 ms).
Origin return Origin return
error 7300 The speed designation of origin
return is outside the settable range
(1 to 500,000 pps).
Origin return
acceleration time
error 7301 The acceleration time designation
of origin return is outside the setta-
ble range (0 to 250 s).
Origin return
deceleration time
error 7302 The deceleration time designation
of origin return is outside the setta-
ble range (0 to 250 s).
Present posi-
tion Present position
error 7400 The position designated with
present position preset is outside
the settable range
(–1,073,741,823 to
1,073,741,823).
JOG JOG speed error 7500 The JOG speed is outside the set-
table range (1 to 500,000 pps).
JOG accelera-
tion time error 7501 The JOG acceleration time is out-
side the settable range (0 to
250 s).
JOG decelera-
tion time error 7502 The JOG deceleration time is out-
side the settable range (0 to
250 s).
Group Name Code Cause Clearing method Operation after
error