Omron CJ1W-C113 - REV 02-2008, Operation Manual

Page: 165 / 406

138
Writing Data with IOWR Section 5-4
completion flag for the IOWR instruction, does not turn ON. Therefore, the
second IOWR instruction is executed once more in the next cycle. Execution
of this second instruction is repeated until all the data in the receive buffer has
been processed. For this reason, it takes at least two cycles for transfer of all
the data to be completed and the instruction to start to be output.
Note Depending on the timing of IOWR instructions, transfer errors may not be
reflected in the CPU Unit. (For details, refer to
5-1 Transferring and Saving
Data. )
5-4-6 IOWR Program Example
A sample program is provided below for writing the indicated speed data to
the PCU. The beginning word address of the transfer data is to be D00500,
and the other settings are as indicated. The data will be transferred to the
PCU designated as unit number 2.
Data Address
(transfer destination)
DM
(transfer source)
Setting
Speed #0 112C
112D 00500
00501 03E8 (1,000 pps)
0000
Speed #1 112E
112F 00502
00503 157C (5,500 pps)
0000
CPU Unit
Unit number
Data transfer
PCU (NC413; unit number 2)
Data area
Speed #0
Speed #1