Omron CJ1W-C113 - REV 02-2008, Operation Manual

Page: 362 / 406

335
Error Code Lists Section 11-5
Multiple axis
start Multiple axis
start 8000 One of the following commands
was executed while the Data
Transferring Flag was ON:
DATA WRITE, DATA READ, or
DATA SAVE
Correct the ladder
program so that
data transfer (read
or write) or data
save operation is
not executed while
the Data Transfer-
ring Flag is ON.
Execute the data
transfer or data
save operation
again. The command will
not be executed.
If the last com-
mand made before
the error was
START, INDEPEN-
DENT START, ORI-
GIN SEARCH,
ORIGIN RETURN,
JOG, ABSOLUTE
MOVEMENT, REL-
ATIVE MOVE-
MENT, or
INTERRUPT
FEEDING, the axis
with the error will be
decelerated to a
stop.
When interpolation
operation is being
used, all interpo-
lated axes will be
decelerated to a
stop.
If the error is gener-
ated during data
transfer (read or
write) or data sav-
ing, all axes will be
decelerated to a
stop.
Any operating axes
not specified above
will not be affected.
Group Name Code Cause Clearing method Operation after
error