![background image](http://html1.mh-extra.com/html/omron/cj1w-c113-rev-02-2008/cj1w-c113-rev-02-2008_operation-manual_742339068.webp)
41
Wiring
Section 3-5
Outputting CW and CCW
Pulses or Pulse and
Direction Signals
In this example, a motor driver with a line receiver input is used and either CW
and CCW pulses or pulse and direction signals are output.
!Caution
Be sure to wire the 5-V DC pulse output power supply with the correct polarity.
Wiring with the polarity reversed will result in damage to internal elements.
Motor driver
(line receiver input
specifications)
Position Control Unit
(line driver outputs on the
CJ1W-NC133/NC233/NC433)
5-VDC input
CW pulse or
pulse
(CW+CCW)
output
CCW pulse or
direction output
5-VDC
power
supply
Note: When connecting a line receiver,
connect the signal ground (SG) of
the motor driver's line receiver input
to the ground (GND) of the 5-VDC
power supply.
(See note.)
SG
Summary of Contents for CJ1W-C113 - REV 02-2008
