LEGRAND Raritan PX3TS, User Manual

Page: 416 / 911

Chapter 7: Using the Web Interface
396
Action Function
Request LHX/SHX
maximum cooling Applies the maximum cooling to the LHX/SHX
device. See
Request LHX/SHX Maximum Cooling
(on page 403).
This option is available only when the Schroff
LHX/SHX support has been enabled.
Send email Emails a textual message. See Send Email (on page
404).
Send sensor report Reports the readings or status of the selected
sensors, including internal or external sensors. See
Send Sensor Report (on page 406).
Send SMS message Sends a message to a mobile phone. See Send SMS
Message (on page 408).
Send snapshots via
email Emails the snapshots captured by a connected
Logitech
®
webcam (if available). See Send
Snapshots via Email (on page 409).
Send SNMP notification Sends SNMP traps or informs to one or multiple
SNMP destinations. See Send an SNMP
Notification (on page 411).
Start/stop Lua script If you are a developer who can create a Lua script,
you can upload it to the PX3TS, and have the PX3TS
automatically perform or stop the script in
response to an event. See
Start or Stop a Lua
Script (on page 412).
Switch LHX/SHX Switches on or off the LHX/SHX device. See Switch
LHX/SHX (on page 413).
This option is available only when the Schroff
LHX/SHX support has been enabled.
Switch outlets Switches on, off or cycles the power to the
specified outlet(s). See
Switch Outlets (on page
414).
Switch outlet group Switches on, off or cycles the power to all outlets
of the specified outlet group. See
Switch Outlet
Group (on page 413).
Switch peripheral
actuator Switches on or off the mechanism or system
connected to the specified actuator. See
Switch
Peripheral Actuator (on page 414).
Syslog message Makes the PX3TS automatically forward event
messages to the specified syslog server. See
Syslog
Message (on page 415).