LEGRAND Raritan PX3TS, User Manual

Page: 893 / 911

Appendix K: Integration
873
3. Attach an AC power cord to the target server and an available rack PDU
outlet.
4. Connect the rack PDU to an AC power source.
5. Power on the KSX II device.
Important: When using CC-SG, the power ports should be inactive before
attaching rack PDUs that were swapped between the power ports. If this is
not done, there is a possibility that the number of power outlets will not be
correctly detected, especially after swapping 8 and 20 outlet rack PDU
models.
Diagram key
KSX II PX SERIAL or
FEATURE port
KSX II Power Ctrl.
1 Port or Power
Ctrl. 2 Port Cat5 cable
PX
Power Control
The KSX II operation to turn on/off or power cycle a PX is the same as the KX III
operation. See
Turning Outlets On/Off and Cycling Power (on page 871).
Dominion SX and SX II
By connecting to a Dominion SX or SX II device, you can associate one or more
outlets on a PX3TS device to specific SX or SX II ports.