LEGRAND Raritan PX3TS, User Manual

Page: 279 / 911

Chapter 7: Using the Web Interface
259
•
Go to an individual sensor's or actuator's data/setup page by clicking its
name.
If wanted, you can resort the list by clicking the desired column header. See
Sorting a List (on page 179).
Sensor/actuator overview on this page:
If any sensor enters an alarmed state, it is highlighted in yellow or red. See
Yellow- or Red-Highlighted Sensors (on page 264). An actuator is never
highlighted.
Column Description
Name By default the PX3TS assigns a name comprising the
following two elements to a newly-managed
sensor/actuator.
▪
Sensor/actuator type, such as "Temperature" or "Dry
Contact."
▪
Sequential number of the same sensor/actuator
type, like 1, 2, 3 and so on.
You can customize the name. See Individual
Sensor/Actuator Pages (on page 273).
Reading Only managed 'numeric' sensors show this data, such as
temperature and humidity sensors.
State
The data is available for all sensors and actuators. See
Sensor/Actuator States (on page 267).
Type Sensor or actuator type.
Serial Number This is the serial number printed on the sensor package's
label. It helps to identify your Raritan sensors/actuators.
See
Finding the Sensor's Serial Number (on page 268).