LEGRAND Raritan PX3TS, User Manual

Page: 642 / 911

Chapter 9: Using the Command Line Interface
622
config:# security roleBasedAccessControl ipv4 enabled <option>
Determine the IPv4 role-based access control policy:
config:# security roleBasedAccessControl ipv4 defaultPolicy <policy>
•
IPv6 commands
Enable or disable the IPv6 role-based access control feature:
config:# security roleBasedAccessControl ipv6 enabled <option>
Determine the IPv6 role-based access control policy:
config:# security roleBasedAccessControl ipv6 defaultPolicy <policy>
Variables:
•
<option> is one of the options: true or false .
Option Description
true Enables the role-based access control feature.
false Disables the role-based access control feature.
•
<policy> is one of the options: allow or deny .
Policy Description
allow Accepts traffic from all IP addresses regardless of the
user's role.
deny Drops traffic from all IP addresses regardless of the
user's role.
Tip: You can combine both commands to modify all role-based access control
parameters at a time. See
Multi-Command Syntax (on page 695).