LEGRAND Raritan PX3TS, User Manual

Page: 689 / 911

Chapter 9: Using the Command Line Interface
669
Example - Default Upper Thresholds for Temperature
It is assumed that your preferred measurement unit for temperature is set to
degrees Celsius. Then the following command sets the default Upper Warning
threshold to 20
and Upper Critical threshold to 24 for all temperature
sensors.
config:# defaultThresholds temperature upperWarning 20
upperCritical 24
Sensor Threshold Configuration Commands
A sensor configuration command begins with sensor . You can use the
commands to configure the threshold, hysteresis and assertion timeout values
for any sensor associated with the following items:
▪
Inlets
▪
Outlets (only available for models with outlet switching)
▪
Overcurrent protectors
▪
Environmental sensors
▪
Transfer switch sensors
It is permitted to assign a new value to the threshold at any time regardless of
whether the threshold has been enabled.
Commands for Inlet Sensors
A sensor configuration command for inlets begins with sensor inlet .
You can configure various inlet sensor threshold settings at a time by
combining multiple commands. See
Multi-Command Syntax (on page 695).
Set the Upper Critical threshold for an inlet sensor:
config:# sensor inlet <n> <sensor type> upperCritical <option>
Set the Upper Warning threshold for an inlet sensor:
config:# sensor inlet <n> <sensor type> upperWarning <option>
Set the Lower Critical threshold for an inlet sensor: