LEGRAND Raritan PX3TS, User Manual

Page: 468 / 911

Chapter 7: Using the Web Interface
448
Field Description
Number of successful
pings to enable feature The number of successful pings required to
declare that the monitored equipment is
"Reachable." Valid range is 0 to 200.
Wait time after
successful ping The wait time before sending the next ping if
the previous ping was successfully responded.
Valid range is 5 to 600 (seconds).
Wait time after
unsuccessful ping The wait time before sending the next ping if
the previous ping was not responded. Valid
range is 3 to 600 (seconds).
Number of consecutive
unsuccessful pings for
failure The number of consecutive pings without any
response before the monitored equipment is
declared "Unreachable." Valid range is 1 to
100.
Wait time before
resuming pinging after
failure The wait time before the PX3TS resumes
pinging after the monitored equipment is
declared "Unreachable." Valid range is 1 to
1200 (seconds).
Number of consecutive
failures before
disabling feature (0 =
unlimited) The number of times the monitored equipment
is declared "Unreachable" consecutively before
the PX3TS disables the ping monitoring feature
for it and shows "Waiting for reliable
connection." Valid range is 0 to 100.
5. On a PDU with outlet switching capability, there is one more checkbox
available --
Power control enabled .
To be able to shut down and power control the monitored IT device via the
Server Reachability page, enable this checkbox and configure related
settings, which are explained in the following table.
6. Click Create.
7. To add more IT devices, repeat the same steps.