LEGRAND Raritan PX3TS, User Manual

Page: 507 / 911

Chapter 7: Using the Web Interface
487
To restore the PX3TS using a backup file:
You must have the Administrator Privileges to restore the device settings.
1. Choose Maintenance > Backup/Restore.
2. Click to select the backup file.
3. Click 'Upload & Restore Device Settings' to upload the file.
▪
A message appears, prompting you to confirm the operation and enter
the admin password.
4. Enter the admin password, then click Restore.
5. Wait until the PX3TS resets and the Login page re-appears, indicating that
the restore is complete.
Note: On startup, PX3TS performs all of its functions, including event rules and
logs, based on the new configuration you have copied instead of the previous
configuration prior to the device reset. For example, the "Bulk configuration
copied" event is logged only when the new configuration file contains the "Bulk
configuration copied" event rule.
The last configuration-copying record:
If you once copied any bulk configuration or device backup file to the PX3TS,
the last record similar to the following is displayed at the bottom of both the
Bulk Configuration and Backup/Restore pages.
Alternative:
To use a different method to perform backup/restore, refer to:
•
Backup and Restore via SCP (on page 713)