LEGRAND Raritan PX3TS, User Manual

Page: 280 / 911

Chapter 7: Using the Web Interface
260
Column Description
Position The data indicates where this sensor or actuator is
located in the sensor chain.
See Identifying the Sensor Position and Channel (on
page 269).
Actuator
Indicates whether this sensor package is an actuator or
not. If yes, the symbol
is shown.
To release or manage sensors/actuators:
When the total of managed sensors/actuators reaches the maximum value,
you cannot manage additional ones. The only way to manage any
sensor/actuator is to release or replace the managed ones. To replace a
managed sensor/actuator, see
Managing One Sensor or Actuator (on page
271). To release any one, follow this procedure.
1. Click to make checkboxes appear in front of sensors/actuators.
Tip: To perform the desired action on only one sensor/actuator, simply click
that sensor/actuator without making the checkboxes appear.
2. Select multiple sensors/actuators.
▪
To release sensors/actuators, you must select "managed" ones only.
See Sensor/Actuator States (on page 267).
▪
To manage sensors/actuators, you must select "unmanaged" ones
only.
▪
To select ALL sensors/actuators, select the topmost checkbox in the
header row.
3. To release selected ones, click > Release.
To manage them, click > Manage.