LEGRAND Raritan PX3TS, User Manual

Page: 671 / 911

Chapter 9: Using the Command Line Interface
651
Example - Creating a Role
The following command creates a new role and assigns privileges to the role.
config:# role create tester firmwareUpdate;viewEventSetup
Results:
•
A new role "tester" is created.
•
Two privileges are assigned to the role: firmwareUpdate (Firmware Update)
and viewEventSetup (View Event Settings).
Authentication Commands
An authentication configuration command begins with authentication .
Determining the Authentication Method
You can choose to set the authentication type only, or both set the
authentication type and determine whether to switch to local authentication in
case the remote authentication is not available.
Determine the authentication type only:
config:# authentication type <option1>
Determine the authentication type and enable/disable the option of
switching to local authentication:
config:# authentication type <option1> useLocalIfRemoteUnavailable <option2>
Note: You cannot enable or disable the option of switching to local
authentication without determining the authentication type in the CLI.
Therefore, always type "authentication type <option1>" when setting up
"useLocalIfRemoteUnavailable".
Variables:
•
<option1> is one of the options: local , ldap or radius .
Option Description
local Enable Local authentication only.
ldap Enable LDAP authentication.