LEGRAND Raritan PX3TS, User Manual

Page: 226 / 911

Chapter 7: Using the Web Interface
206
▪
Enter assertion times (seconds). See "To Assert" and Assertion
Timeout (on page 837).
▪
Enter deassertion hysteresis values. To disable the deassertion
hysteresis, type 0 (zero). See "To De-assert" and Deassertion
Hysteresis (on page 839).
Note: Any changes made to power quality thresholds will change the voltage
and frequency threshold values of both inlets. See
Individual Inlet Pages (on
page 218).
Example:
If you set the voltage's Lower Critical to 70V and Lower Warning to 80V,
Inlet 1's power quality is shown as Critical when Inlet 1's voltage drops to
or lower than 70V, and Inlet 2's power quality is shown as Warning when
Inlet 2's voltage falls between 70V and 80V.
PDU
The PX3TS device's generic information and PDU settings are available on the
PDU page.
To open the PDU page, click 'PDU' in the Menu (on page 176).
Device information shown:
•
Firmware version
•
Serial number
•
MAC address
•
Rating
•
Internal Beeper State (on page 211)
To configure global settings:
1. Click Edit Settings.
2. Now you can configure the fields.