LEGRAND Raritan PX3TS, User Manual

Page: 697 / 911

Chapter 9: Using the Command Line Interface
677
•
<hy_value> is a numeric value that is assigned to the hysteresis for the
specified environmental sensor. See
"To De-assert" and Deassertion
Hysteresis (on page 839).
•
<as_value> is a number in samples that is assigned to the assertion
timeout for the specified environmental sensor. It ranges between 1 and
100. See
"To Assert" and Assertion Timeout (on page 837).
Commands for Transfer Switch Sensors
A sensor threshold configuration command for transfer switch sensors begins
with
sensor ts . Currently only inlet phase sync angle settings can be configured.
You can configure various inlet phase sync angle settings at a time by
combining multiple commands. See
Multi-Command Syntax (on page 695).
Set the Upper Critical threshold for the inlet phase sync angle:
config:# sensor ts inletPhaseSyncAngle upperCritical <option>
Set the Upper Warning threshold for the inlet phase sync angle:
config:# sensor ts inletPhaseSyncAngle upperWarning <option>
Set the Lower Critical threshold for the inlet phase sync angle:
config:# sensor ts inletPhaseSyncAngle lowerCritical <option>
Set the Lower Warning threshold for the inlet phase sync angle:
config:# sensor ts inletPhaseSyncAngle lowerWarning <option>
Set the deassertion hysteresis for the inlet phase sync angle:
config:# sensor ts inletPhaseSyncAngle hysteresis <hy_value>
Set the assertion timeout for the inlet phase sync angle: