LEGRAND Raritan PX3TS, User Manual

Page: 725 / 911

Chapter 9: Using the Command Line Interface
705
To reset one outlet's active energy readings:
# reset activeEnergy outlet <outlet_n>
-- OR --
# reset activeEnergy outlet <outlet_n> /y
To reset one outlet group's active energy readings:
# reset activeEnergy outletgroup <ID>
-- OR --
# reset activeEnergy outletgroup <ID> /y
If you entered the command without "/y", a message appears prompting you
to confirm the operation. Type y to confirm the reset or n to abort it.
Variables:
•
<n> is the inlet number.
•
<outlet_n> is an outlet number.
•
<ID> is an outlet group's index number.
Note: The outlet active energy reset feature is only available for models
with outlet switching.
Resetting to Factory Defaults
The following commands restore all settings of the PX3TS to factory defaults.
To reset PX3TS settings after login, use either command:
# reset factorydefaults
-- OR --
# reset factorydefaults /y
To reset PX3TS settings before login:
Username: factorydefaults
See Using the CLI Command (on page 776) for details.
Note: Device reset will cause CLI communications over an "USB" connection to
be lost. Therefore, re-connect the USB cable after the reset is complete.