LEGRAND Raritan PX3TS, User Manual

Page: 688 / 911

Chapter 9: Using the Command Line Interface
668
config:# defaultThresholds <sensor type> hysteresis <hy_value>
Set the Default Assertion Timeout for a specific sensor type:
config:# defaultThresholds <sensor type> assertionTimeout <as_value>
Variables:
•
<sensor type> is one of the following numeric sensor types:
Sensor types Description
absoluteHumidity Absolute humidity sensors
relativeHumidity Relative humidity sensors
temperature Temperature sensors
airPressure Air pressure sensors
airFlow Air flow sensors
vibration Vibration sensors
•
<value> is the value for the specified threshold of the specified sensor type.
Note that diverse sensor types use different measurement units.
Sensor types Measurement units
absoluteHumidity g/m^3 (that is, g/m
3
)
relativeHumidity %
temperature
Degrees Celsius ( ) or Fahrenheit ( ), depending on
your measurement unit settings.
airPressure Pascal (Pa) or psi, depending on your measurement
unit settings.
airFlow m/s
vibration g
•
<hy_value> is the deassertion hysteresis value applied to the specified
sensor type.
•
<as_value> is the assertion timeout value applied to the specified sensor
type. It ranges from 0 to 100 (samples).