LEGRAND Raritan PX3TS, User Manual

Page: 755 / 911

Appendix C: Configuration or Firmware Upgrade with a USB Drive
735
logfile
•
Specify the name of a text file where the PX3TS will append the log
messages when interpreting the USB drive contents.
•
If the specified file does not exist in the USB drive, it will be automatically
created.
•
If this option is not set, no log messages are recorded. The disadvantage is
that no feedback is available if the PX3TS detects a problem with the USB
drive contents.
firmware
•
Specify the name of a firmware binary file used to upgrade your PX3TS.
•
The specified firmware file must be compatible with your PX3TS and have
an official Raritan signature.
•
If the specified firmware file is the same as the current firmware version of
your PX3TS, no firmware upgrade is performed.
•
The default is to NOT permit any firmware downgrade via USB drive on
Raritan power products with "USB-A" port(s). To do this, the parameter
"allow_downgrade" must be present and properly set in the
fwupdate.cfg
file.
config
•
Specify the name of the configuration file containing device settings.
•
The suggested filename is config.txt . See config.txt (on page 738).
device_list
•
Specify the name of the configuration file listing all PX3TS devices to
configure and their device-specific settings.
•
This file is required if any macros are used in the device configuration file
"config.txt."
•
The suggested filename is devices.csv . See devices.csv (on page 741).
match
•
Specify a match condition for identifying a line or one PX3TS device in the
device configuration file "devices.csv."
The option's value comprises one word and one number as explained
below:
▪
The word prior to the colon is an identification property, which is
either
serial
for serial number or
mac
for MAC address.
▪
The number following the colon indicates a column in the devices.csv
file.
For example,
mac:7
instructs the PX3TS to search for the MAC address in
the 7th column of the "devices.csv" file.