LEGRAND Raritan PX3TS, User Manual

Page: 789 / 911

769
You can modify any existing "config.txt", and then upload it to a specific PX3TS
for modifying part or all of its settings.
There are two ways to get one "config.txt":
•
You create this file by yourself, either using or not using the Mass
Deployment Utility. See
Configuration Files (on page 733) and config.txt
(on page 738).
•
You download the raw configuration data from any PX3TS.
The downloaded raw configuration contains "almost" all of current settings on
your PX3TS.
Warning: Some configuration keys in the downloaded raw configuration are
commented out, and those must NOT be part of the configuration that will
be uploaded to any PX3TS. See
Keys that Cannot Be Uploaded (on page
719).
Both configuration download and upload operations require the Administrator
Privileges.
In This Chapter
Downloading Raw Configuration ...................................................................... 769
Uploading Raw Configuration ........................................................................... 771
Downloading Raw Configuration
There are three download methods:
•
Web browsers: See Download via Web Browsers (on page 769).
•
SCP or PSCP command: See Uploading or Downloading Raw Configuration
Data (on page 716).
•
CURL command: See Download via Curl (on page 770).
Download via Web Browsers
There are two scenarios by using web browsers.
URL containing login credentials:
To log in immediately while issuing the download request, type an URL
containing the login credentials in the web browser.
http(s)://<user>:<password>@<device IP>/cgi-bin/raw_config_download.cgi
Appendix E Raw Configuration Upload and Download