LEGRAND Raritan PX3TS, User Manual

Page: 340 / 911

Chapter 7: Using the Web Interface
320
Field/setting Description
RADIUS
authentication server
name
This field appears when 'EAP' is selected.
Type the name of the RADIUS server if it is present in
the TLS certificate.
▪
The name must match the fully qualified domain
name (FQDN) of the host shown in the certificate.
•
Available settings for the CA Certificate:
If the required certificate file is a chain of certificates, and you are not sure
about the requirements of a certificate chain, see
TLS Certificate Chain (on
page 859).
Field/setting Description
Enable verification of
TLS certificate chain Select this checkbox for the PX3TS to verify the validity
of the TLS certificate that will be installed.
▪
For example, the PX3TS will check the certificate's
validity period against the system time.
Click this button to import a certificate file. Then you
can:
▪
Click Show to view the certificate's content.
▪
Click Remove to delete the installed certificate if it
is inappropriate.
Allow expired and
not yet valid
certificates
▪
Select this checkbox to make the authentication
succeed regardless of the certificate's validity
period.
▪
After deselecting this checkbox, the authentication
fails whenever any certificate in the selected
certificate chain is outdated or not valid yet.
Allow connection if
system clock is
incorrect When this checkbox is deselected, and if the system
time is incorrect, the installed TLS certificate is
considered not valid yet and will cause the wireless
network connection to fail.
When this checkbox is selected, it will make the
wireless network connection successful when the
PX3TS system time is earlier than the firmware build
before synchronizing with any NTP server.
▪
The incorrect system time issue may occur when
the PX3TS has once been powered off for a long
time.