LEGRAND Raritan PX3TS, User Manual

Page: 633 / 911

Chapter 9: Using the Command Line Interface
613
Direction Description
out Outbound traffic.
•
<rule_number> is the number of the existing rule that you want to modify.
•
<ip_mask> is the combination of the IP address and subnet mask values (or
prefix length), which are separated with a slash. For example, an IPv4
combination looks like this:
192.168.94.222/24 .
•
<policy> is one of the options: accept, drop or reject .
Option Description
accept Accepts traffic from/to the specified IP address(es).
drop Discards traffic from/to the specified IP address(es),
without sending any failure notification to the source
or destination host.
reject Discards traffic from/to the specified IP address(es),
and an ICMP message is sent to the source or
destination host for failure notification.
Deleting a Firewall Rule
The following commands remove a specific IPv4 or IPv6 rule from the list.
IPv4 commands
config:# security ipAccessControl ipv4 rule delete <direction> <rule_number>
IPv6 commands
config:# security ipAccessControl ipv6 rule delete <direction> <rule_number>
Variables:
•
<direction> is one of the options: in or out .
Direction Description
in Inbound traffic.
out Outbound traffic.
•
<rule_number> is the number of the existing rule that you want to
remove.