LEGRAND Raritan PX3TS, User Manual

Page: 709 / 911

Chapter 9: Using the Command Line Interface
689
Specifying the Asset Strip Orientation
This command syntax specifies the orientation of the asset strips connected to
the PX3TS device. Usually you do not need to perform this command unless
your asset strips do NOT come with the tilt sensor, causing the PX3TS unable to
detect the asset strips' orientation.
config:# assetStrip <n> assetStripOrientation <orientation>
Variables:
•
<n> is the number of the FEATURE port where the selected asset strip is
physically connected. For the PX3TS device with only one FEATURE port,
the number is always 1.
•
<orientation> is one of the options: topConnector or bottomConnector .
Orientation Description
topConnector This option indicates that the asset strip is
mounted with the RJ-45 connector located on the
top.
bottomConnector This option indicates that the asset strip is
mounted with the RJ-45 connector located at the
bottom.
Setting LED Colors for Connected Tags
This command syntax sets the LED color for all rack units on the asset strip #1
to indicate the presence of a connected asset tag.
config:# assetStrip <n> LEDColorForConnectedTags <color>
Variables:
•
<color> is the hexadecimal RGB value of a color in HTML format. The
<color> variable ranges from #000000 to #FFFFFF.