LEGRAND Raritan PX3TS, User Manual

Page: 590 / 911

Chapter 9: Using the Command Line Interface
570
Setting the Outlet Relay Behavior
This section applies to outlet-switching capable models only.
This command syntax determines the relay behavior of all outlets on a PX3TS
model.
config:# pdu relayBehaviorOnPowerLoss <option>
Variables:
•
<option> is one of the options: latching or nonLatching .
Note: For more information on the outlet relay behavior, see PX3TS Latching
Relay Behavior (on page 212).
Setting the Outlet Power-On Sequence
This section applies to outlet-switching capable models only.
This command sets the outlet power-on sequence when the PDU powers up.
config:# pdu outletSequence <option>
Variables:
•
<option> is one of the options: default , or a comma-separated list of outlet
numbers.
Option Description
default All outlets are switched ON in the ASCENDING order
(from outlet 1 to the final outlet) when the PX3TS
powers up.
A comma-
separated list of
outlet numbers All outlets are switched ON in the order you specify
using the comma-separated list.
The list must include all outlets on the PDU.
Note: Power-on sequencing is disabled in the latching mode. See PX3TS
Latching Relay Behavior (on page 212).