LEGRAND Raritan PX3TS, User Manual

Page: 629 / 911

Chapter 9: Using the Command Line Interface
609
config:# security ipAccessControl ipv4 defaultPolicyIn <policy>
Determine the default IPv4 firewall control policy for outbound traffic:
config:# security ipAccessControl ipv4 defaultPolicyOut <policy>
•
IPv6 commands
Enable or disable the IPv6 firewall control feature:
config:# security ipAccessControl ipv6 enabled <option>
Determine the default IPv6 firewall control policy for inbound traffic:
config:# security ipAccessControl ipv6 defaultPolicyIn <policy>
Determine the default IPv6 firewall control policy for outbound traffic:
config:# security ipAccessControl ipv6 defaultPolicyOut <policy>
Variables:
•
<option> is one of the options: true or false .
Option Description
true Enables the IP access control feature.
false Disables the IP access control feature.
•
<policy> is one of the options: accept, drop or reject .
Option Description
accept Accepts traffic from all IP addresses.
drop Discards traffic from all IP addresses, without sending
any failure notification to the source host.
reject Discards traffic from all IP addresses, and an ICMP
message is sent to the source host for failure
notification.