LEGRAND Raritan PX3-3000 Series, User Manual

Page: 693 / 977

Chapter 8: Using the Command Line Interface
672
Sensor type Description
voltage Voltage sensor
activePower Active power sensor
apparentPower Apparent power sensor
powerFactor Power factor sensor
activeEnergy Active energy sensor
unbalancedCurrent Unbalanced load sensor
lineFrequency Line frequency sensor
phaseAngle Inlet phase angle sensor
Note: If the requested sensor type is not supported, the "Sensor is
not available" message is displayed.

<option> is one of the options:
enable, disable or a numeric value.
Option Description
enable Enables the specified threshold for a specific inlet
sensor.
disable Disables the specified threshold for a specific
inlet sensor.
A numeric
value Sets a value for the specified threshold of a
specific inlet sensor and enables this threshold at
the same time.

<hy_value> is a numeric value that is assigned to the hysteresis for
the specified inlet sensor. See
"To De-assert" and Deassertion
Hysteresis
(on page 898).

<as_value> is a numeric value that is assigned to the assertion
timeout for the specified inlet sensor. See
"To Assert" and
Assertion Timeout
(on page 896).
Additional sensors supported by specific models:
Specific PX3 models support some or all of the following sensors. The
CLI command(s) listed above can be also applied to the following sensors.
Note that the measurement unit of current values in CLI is A, not mA.
Sensor type Description
peakCurrent Peak current sensor