LEGRAND Raritan PX3-3000 Series, User Manual

Page: 115 / 977

Chapter 5: Introduction to PDU Components
94
You can use the LCD display to view the PDU information and even switch
an outlet. It consists of:

A dot-matrix LCD display

Four control buttons
Zero U models automatically adjust the orientation of the content shown
on the dot-matrix LCD display after detecting the direction in which the
PDU is installed. 1U and 2U models do NOT adjust the content's
orientation.
If the orientation of your Zero U model's LCD content does not meet your
need, you can manually change it and stick to the orientation. See
Manually Changing PX3's Zero U LCD Orientation (on page 133).
Note 1: All dot-matrix LCD display diagrams illustrated in the User Guide
are for Zero U models. Your dot-matrix LCD may look slightly different if
it is on a 1U/2U model.
Note 2: For information on LCD displays of old PX3 models, see Old
Generations of PX3 Models (on page 817).