Chapter 6: Using the Web Interface
388
a.
Click the first
to select a target component from the list.
b.
Click the second
to select the specific sensor for the target
from the list.
c.
Click
to add the selected sensor to the Report Sensors
list box.
For example, to monitor the current reading of the Inlet 1, select
Inlet 1 from the left field, and then select RMS Current from the right
field.
6.
To report additional sensors simultaneously, repeat the above step
to add more sensors.
To remove any sensor from the 'Report sensors' list box, select it
and click
. To make multiple selections, press Ctrl+click
or Shift+click to highlight multiple ones.
7.
To immediately send out the sensor report, click Send Report Now.
Tip: When intending to send a sensor report using custom messages,
use the placeholder [SENSORREPORT] to report sensor readings. See
Placeholders for Custom Messages
(on page 407).
Summary of Contents for Raritan PX3-3000 Series
