LEGRAND Raritan PX3-3000 Series, User Manual

Page: 607 / 977

Chapter 8: Using the Command Line Interface
586

<option2> is one of the options: true or false.
Option Description
true Always make the network connection successful
even though the TLS certificate chain contains any
certificate which is outdated or not valid yet.
false The network connection is NOT successfully
established when the TLS certificate chain contains
any certificate which is outdated or not valid yet.

<option3> is one of the options: true or false.
Option Description
true Make the network connection successful when the
PX3 system time is earlier than the firmware build
before synchronizing with the NTP server, causing
the TLS certificate to become invalid.
false The network connection is NOT successfully
established when the PX3 finds that the TLS
certificate is not valid due to incorrect system time.

<FQDN> is the name of the RADIUS server if it is present in the TLS
certificate. The name must match the fully qualified domain name
(FQDN) of the host shown in the certificate.
Setting the BSSID
This command specifies the BSSID.
config:# network wireless BSSID <bssid>
Variables:

<bssid> is either the MAC address of the wireless access point or
none for automatic selection.