LEGRAND Raritan PX3-3000 Series, User Manual

Page: 216 / 977

Chapter 6: Using the Web Interface
195
Button Function
Top
Up
Down
Bottom
Restores to the default sequence
Next time when power cycling the PX3, it will turn on all outlets based on
the new outlet order.
The new order also applies when performing the power-on or
power-cycling operation on partial outlets.
To set a power-on delay for any outlet:
1. On the same outlets list, click the 'Delay' column of the outlet that
requires a wait after it is turned on.
2. Type a new value in seconds.
3. Click Save.
PX3 will insert a power-on delay between the configured outlet and the
one following it during the power-on process.
Setting Non-Critical Outlets
Outlets that are turned off when load shedding is activated are called
non-critical outlets. Outlets that are not affected by load shedding are
called critical outlets. See
Load Shedding Mode
(on page 197).
Per default, all outlets are configured as critical.
To determine critical and non-critical outlets:
1. On the Outlets page, click > Load Shedding Setup.
2. To set non-critical outlets, select the checkboxes of those you want.